Refinery Process Chemicals

Our Refinery Process Chemicals include Corrosion Inhibitors, Neutralization Agent, Defoamer, Scale Inhibitor, Improver, Dechlorine Agent , Combustion improver, Passivator, Desulfurizing Agent...
  • Description

    HS-01 composite corrosion inhibitor can prevent fractionating tower top from being corroded, it is suitable for protecting distillation tower and its top pipes ,which treat high-sulfur-content crude oil.

    Features

    1. Suitable for production equipments of high sulfur content crude oil
    2. Less dosage and high effect, the corrosion rate is up to 90%
    3. Composed with kinds of additives
  • Description

    HS-02 Hydrogenation corrosion inhibitor is mainly used for preventing the corrosion of high hydrogen sulfide (H2S) and hydrogen chloride at the hydrogenation unit in the refinery.

    Features

    a.It is oil soluble inhibitor, can be mutually dissolved with gasoline, kerosene, ethyl alcohol and acetone in any scale and no pitting, it won’t influence the quality of the oil.
    b.The inhibitor has the advantages of high efficiency, less injection , wide protective part , wide scope PH application, and excellent compatibleness with ammonia or organic neutralization agent.
  • Description

    HS-03 sour water stripping corrosion inhibitor is used in waste water stripping unit, the product can be adsorbed on the metal surface of the device to form a hydrophobic protective film to prevent the direct contact of metal and the corrosive water, effectively preventing the metal corrosion caused by acid gases such as hydrogen sulfide, carbon dioxide ,etc.

    Features

    1.good water solubility;
    2.less adding amount , good inhibition effect;
    3.compounded by a variety of additives.

    Technical Indicators
  • Description

    HS-04 neutralization film-forming corrosion inhibitor is mainly used for preventing the corrosion caused by hydrogen sulfide (H2S) ,and hydrogen chloride at the atmospheric and vacuum unit,hydrofining unit, and the coking unit in the refinery.

    Distinguishing features

    a. Water-solubility is good.
    b.This product is a kind of composite neutralization corrosion inhibitor, which is compounded by many kinds of components.
    (1) It can neutralize the acid of HCl, H2S and SO2 in water to prevent acid corrosion.
  • Description

    HS-06 hydrogenation air cooling corrosion inhibitor is suitable for hydrofining unit and hydrocracking unit in refinery to prevent the corrosion of wet H2S at high-pressure low-temperature reaction parts. It replaces the polysulfide corrosion inhibitor used in this part, can overcome the drawbacks of easily precipitating sulfur and clogging pipes in the course of using , reaching a better inhibition effect than polysulfide corrosion inhibitor .

    Features

    1. It is a kind of water-soluble and N-containing corrosion inhibitor, comprises a plurality of N atoms in the molecule, has the effect of resisting corrosion caused hydrogen sulfide, can overcome the dew point corrosion in the process of condensation.
    2. It has the effect of film-forming function, which means it can form a stable protective film to avoid the corrosion of acid and alkaline medium. It can react with H+ in the molecule such as:H2S, HCL, HCN ,etc. in the medium,reducing acid corrosion .
    3. Added conveniently, does not affect the oil quality and the normal production of devices.
  • Description
    HS-07 corrosion inhibitor is mainly used at the fractionating tower of delayed coking unit in the refinery.

    Features
    1. Good water solubility , does not affect the oil quality;
    2. High efficiency;
    3. Compounded by a variety of additives,endure wide range temperature .

    Technical Indicators
  • Description

    It is mainly used to be against the corrosion of hydrogen sulfide and hydrogen chloride at the top of tower .

    Features
    1.After injected, it can rapidly neutralize the acid caused by HCl, H2S and SO2 dissolved in water, avoid the fouling and corrosion under the scale caused by the traditional ammonia injection.

    2.It has a good synergistic effect together with corrosion inhibitor, it can control the PH from 6.0 to 8.0 stably at the top of tower , inhibit the corrosion at the “dew point” parts of the equipment;

    Technical Indicators
  • Introduction
    It is used for delayed coking unit. It can lower the foaming height of the coke unit to prolong the coke-forming time, reduce the coke-powder entrainment to protect cold exchange equipment and radiant pump, reduce the coke-powder entrainment of the gasoline and diesel oil to lessen coke-powder sediment at the volatilization line and the bottom of the dephlegmator, in order to keep the production cycle long and safe.

    Distinguishing features
    a. Less dosage, long life, stable chemical composition.
    b. Fast defoaming speed, persistent inhibition.
    c . The product is very safe and never cause corrosion to metal parts.

    Technical Index
With mastering of the different standards between international and China domestic, our own quality control center -technical quality department is responsible to control the quality & performance of all products and services. Effective control of all links and factors related to the production and delivery process to ensure that each production process is carried out in a controlled manner under controlled conditions, providing products that meet the requirements.
Technical quality department is responsible for the preparation and issue of production operation procedures, product standards and other technical documents, responsible for special process confirmation and process supervision and responsible for product inspection, determination of non-conforming product, supervision and control of identification and traceability;
Moreover, through cooperation with SINOPEC Research Institute of Petroleum Processing, East China university of Science and Technology, Tianjin University, Shenyang University of Chemical Technology, Hebei University of Technology, and other scientific research institutions and universities, we can offer a full package of solutions for all requirements.
As a supplement, we are willing to cooperate with several third party inspectors as required. Our vision is to delivery high-performance products to our customers with best quality and highest performance.
1.Provide the analysis report of physical and chemical properties, quality certificate and operation instruction, MSDS, product quality standard and inspection method,etc, which will ensure product quality.
2.Assist customers in formulating products industry usage plan (configuration concentration, using method, abnormal condition processing, etc.)
3.During the use of products, we will call customers timely to know about the usage situation, according to customer’s on-site technology and raw materials change to actively cooperate with customers to optimize the usage plan.
4.In case of any abnormity during the use of products, we shall respond to the request within four hours after receiving the notice.
Our goal is to provide a rapid response time to meet your needs, coupled with more focused dialogue, expert support and better overall results.

Welcome to our website.If you have any requests or suggestions please fill in and send the following form. Please allow us to provide you with the best service. (Please fill out the information below.* indicates a required field.)

2212501771 [email protected] 13673270471