Refinery Process Chemicals

Our Refinery Process Chemicals include Corrosion Inhibitors, Neutralization Agent, Defoamer, Scale Inhibitor, Improver, Dechlorine Agent , Combustion improver, Passivator, Desulfurizing Agent...
  • Introduction
    This defoamer is used for delayed coking unit. It can reduce the foam layer highness, extend coking time, decrease coke powder taken, protect exchanger and cold device and radial pump, put an end to catalyzer poisoning in the subsequent hydrogenation unit. It can also reduce coke powder sediment in the volatilization line and the fractionating tower so that to prolong safe production period.

    Features
    1. No silicon element, harmless to catalyst of hydrogenation unit.
    2. Less dosage, long using period, stable chemical compose.
    3. Fast defoaming speed and lasting antifoaming nature.
    4. No corrosion to metal.

    Physical and Chemical Properties
  • Description

    This agent is used for preventing scaling at the heat exchanger, reactor, and pipeline of hydrocracking unit in the refinery.

    Features

    a.It has no components(such as metal and so on)which have bad effects on the activity of hydrogenation catalyst, product distribution, and product properties.
    b.Low ash content , lest cause reduced porosity on catalyst bed layer, increased bed pressure drop .
    c. The injecting amount is less, but the scale inhibition rate is up to more than 92%.

    Technical Index
  • Description

    JAF-2 hydrofining scale inhibitor is suitable for preventing scale formation of hydrogenation heat exchanger in the oil refinery .

    Characteristics
    1.There is no components (such as metal, etc.) in the scale inhibitor, which have bad effects on the activity of hydrogenation catalyst, product distribution, and product properties.
    2. Low ash content , lest cause reduced porosity on catalyst bed layer, increased bed pressure drop .
    3. Less adding quantity ,convenient to use, scale inhibition rate can reach more than 92%.

    Technical Indicators
  • Introduction

    This oil sludge scale inhibitor is a very effective agent to keep the oil sludge system from forming scale. It is suitable for oil sludge pipeline, heat exchanger, and it also has certain effect on getting rid of scale already formed , improving the efficiency of heat exchanger to allow the stable operation of this system,to prolong the operation cycle and reduce the downtime.

    Feature

    1. The product has good dispersivity, it can effectively avoid the accumulation of catalyst powder, corrosion products and salt, etc., suspended in the oil sludge to control the increase and deposition of particles.
    2. It has antioxidant property to stop polymerization caused by oxygen.
    3. It has metal passivation property to stop or reduce catalytic dehydrogenation and oxidization reaction.
    4. It has corrosion resistance and surface modification feature.

    Technical Data
  • Description

    Delayed Coking Scale Inhibitor is applied to delayed coking unit, to delay the coke of radiation tube furnace, prolong the period of run.

    Features

    1.It has antioxidant properties and metal passivation function,can form stable complex with metal ions in the oil the residue ;
    2.It has cleaning and splitting function; once a small amount of fouling or corrosion products are formed, it can deter them to get together to limit the increase particle deposition;
    3.It contains anti-corrosion agent and film-forming agent, so that the metal will not be oxygen ed and corroded.

    Technical Indicators
  • Features

    1.The product has good dispersivity, it can effectively avoid accumulation of catalytic agent powder, corrosion products and salt, etc., suspended in the residuum oil, and therefore control the increase of particle in the residuum oil and deposition.
    2.It has anti-oxidizing property, it can form inertia molecule with the oxidized free hydroxyl group and can stop polymerization caused by oxygen.
    3.It has metal passivation property, and corrosion resistant property and surface modification feature.

    Technical Data
  • Features

    1.Stable performance, low toxicity, no smell and water soluble.
    2.High content of effective component, low consumption.
    3.Good atomization and dispersibility property.
    4.It contains rare-earth element, and can act as normal metal passivation agent , can also raise the activity of balanced catalyst.

    Technical Data
  • Features

    The product is composed by multi-component. Its main components are MDEA and some kinds of high-effective additives. It has higher activation and desulfurizing effect than N-methyldiethanolamine. Its desulfurizing selectivity, capacity for absorbing acid gas, stability, antifoaming ability and regeneration ratio are fairly better than N-methyldiethanolamine. It has good chemical stability, better resistance to oxidation, lower corrosiveness and lower freezing point. It can be used very conveniently.


    Technical Data
With mastering of the different standards between international and China domestic, our own quality control center -technical quality department is responsible to control the quality & performance of all products and services. Effective control of all links and factors related to the production and delivery process to ensure that each production process is carried out in a controlled manner under controlled conditions, providing products that meet the requirements.
Technical quality department is responsible for the preparation and issue of production operation procedures, product standards and other technical documents, responsible for special process confirmation and process supervision and responsible for product inspection, determination of non-conforming product, supervision and control of identification and traceability;
Moreover, through cooperation with SINOPEC Research Institute of Petroleum Processing, East China university of Science and Technology, Tianjin University, Shenyang University of Chemical Technology, Hebei University of Technology, and other scientific research institutions and universities, we can offer a full package of solutions for all requirements.
As a supplement, we are willing to cooperate with several third party inspectors as required. Our vision is to delivery high-performance products to our customers with best quality and highest performance.
1.Provide the analysis report of physical and chemical properties, quality certificate and operation instruction, MSDS, product quality standard and inspection method,etc, which will ensure product quality.
2.Assist customers in formulating products industry usage plan (configuration concentration, using method, abnormal condition processing, etc.)
3.During the use of products, we will call customers timely to know about the usage situation, according to customer’s on-site technology and raw materials change to actively cooperate with customers to optimize the usage plan.
4.In case of any abnormity during the use of products, we shall respond to the request within four hours after receiving the notice.
Our goal is to provide a rapid response time to meet your needs, coupled with more focused dialogue, expert support and better overall results.

Welcome to our website.If you have any requests or suggestions please fill in and send the following form. Please allow us to provide you with the best service. (Please fill out the information below.* indicates a required field.)

2212501771 [email protected] 13673270471